Area map cannot be customized with vertical coordinates

[ttodayParticipant]

Dear Friends，

When I was plotting the area chart I had a problem, I could not choose a custom coordinate on the area map. It always chose the first column by default, that is, the serial number, the specific picture is as follows:

While all other parameters can simultaneously use depth as the Y-axis, the area map can only use the ordinal number of the first column, which leads to serious problems as follows：

The latter parameters with a depth of 30 (cm) as the Y-axis match normally, but the Y-axis of the area map is the first column serial number, and it is able to reach 118 for Y, which makes the whole drawing incomplete！

This question is bugging me and I would appreciate it if I could get a relatively complete answer.I hope to get a response soon, thank you very much！

[dgteamModerator]

We just answered via YouTube.

Please see the video here:

https://youtu.be/q5G9KBN6pVw

Does this help solve your problem?

[ttodayParticipant]

I have watched the video and achieved good results. Thank you very much.

I hope that the future version update will be able to add optional items directly under the bar command. I hope the Datagraph will become better, thanks again for your help!

[Author]

Posts