Connect Line Gaps

This topic has 4 replies, 3 voices, and was last updated 4 years, 4 months ago by lorenzgl.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
November 18, 2019 at 3:57 pm #2743
lorenzgl
Participant
Multi-segment lines drawn with the connect command aren’t drawn as continuous lines but show gaps when connecting to the same point. My assumption is that this isn’t the desired behavior for most use-cases. Instead, a continuous line should be drawn where points are connected (or this could be a option in “end caps” style)
November 18, 2019 at 7:46 pm #2746
dgteam
Moderator
Could you send an example of what you mean?

The connect command will connect x-y coordinates. There are several examples you can find in the example files (in DataGraph 4.5 out today!).

Search on “connect command” as shown below …
November 18, 2019 at 9:53 pm #2748
lorenzgl
Participant
November 19, 2019 at 2:16 am #2750
david
Moderator
Why not use the Plot command? That will bridge the gap.
November 19, 2019 at 5:02 pm #2751
lorenzgl
Participant
Good point… now I feel stupid. Will try.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.